September 13, 2017
GGB to Present Paper, Exhibit at HYDRO 2017
GGB Bearing Technology principal engineer for tribological materials Michael Kim will present a...
From September 25, 2017 to September 27, 2017
CTI Symposium China
Visit us at stand #46
From October 9, 2017 to October 13, 2017
MSV Brno 2017
Visit us at hall V, stand 125
Get in touch with our experts
Oil & Gas
Increase Service Life
Replace Roller Bearings
Reduce Size / Weight
Engineered Plastics Bearings
Fiber Reinforced Composite Bearings
Bushing Blocks and Thrust Plates
Metal and Bimetal Bearings
AT A GLANCE
The performance of a manual or DCT automotive gearbox is typically measured by its efficiency, ease of operation and the gear change smoothness and rapidity. These characteristics must remain constant even after the millions of gear changes that occur during the lifetime of a vehicle.
To shift the gears, the gear stick in the vehicle is linked via cables to a shifting tower in the gearbox that activates the shifter forks positioned between the gear sets.
When the gear stick is moved from 1st to 2nd gear, from 2nd to 3rd gear etc., the bearings in the shifting tower and shifter forks slide on steel rails in rotational and linear movements to activate each gear change.
To ensure reliable and smooth working whether operating under dry (after a period of rest) or lubricated conditions, GGB DP4 metal polymer composite bearings are mounted in the shifter forks and in the shifting towers.
The structure of GGB DP4® self-lubricating bearings consists of a strong steel backing, to which is bonded a porous bronze sinter interlayer impregnated and overlaid with a low friction PTFE enriched wear resistant bearing layer.
Some of the benefits obtained by using GGB DP4® auto bearings are the following:
Boot, Bonnet and Door Hinges
Isolator Pulley Dampers
Explore our customer reviews