Skip to main content
Image

GGB-SHB®

Case Hardened Steel Bearings
GGB-SHB case hardened steel cylindrical bearings
GGB-SHB Case Hardened Steel Bimetal Bearing Selection
GGB-SHB Cylindrical Surface Treated Bearings
GGB-SHB Case Hardened Steel Flanged bearings

Product's benefits

  • Material is resistant to shock loads
    Resistant to Shock Loads
  • Quality materials you can rely on
    Quality/Reliability
  • Material performs well under lubricated operation
    Lubricated operation
  • Material offers good wear resistance
    Increased Wear Resistance
  • Material withstands high loads
    High Load Capacity
  • Material helps extend application's service life
    Extended service life

Characteristics

  • Steel bushings ideally suited for lubricated applications
  • With plain or grooved sliding layer
  • Suitable for grease lubrication
  • Low rotation speed with high specific pressure
AVAILABILITY

Bearing forms available in standard dimensions

  • Plain cylindrical bushes

Bearing forms made to order: bearings with various lubrication grooves, non-standard parts

 

GGB-SHB® steel bushing material is known by various names such as SHB or GGB SHB. Buying a GGB-SHB® steel bushing from GGB or its authorized distributors guarantees that you do not receive​ a counterfeit product. 

Operating performance

Choose the product I want to compare
GGB-SHB®
Dry Operation Poor
Lubricated Operation Good
Greased Operation Very Good
Machinable Consult with Applications Engineer
RoHS Compliant Compliant
Standard Sizes Available
Application Excellence
HSG
Very Good
Fair
Fair
Consult with Applications Engineer
Compliant
Available
GAR-MAX®
Very Good
Fair
Fair
Consult with Applications Engineer
Compliant
Available

Composition

Case Hardened Steel Bearings 

Technical specifications

  • General

    BEARING PROPERTIES Value Unit
    Maximum load, p
    - Static 300 43,500 N/mm2 psi
    - Dynamic 150 21,500 N/mm2 psi
    Operating Temperature
    - Min °C °F
    - Max 150 302 °C °F
    Coefficient of Linear Thermal Expansion 12 6.67 10-⁶/K 10-⁶/F
    Density 7.8 0.282
    Tensile Strength 550 79,750 N/mm² psi
    Grease Lubricated
    Maximum sliding speed, U 0.1 19.7 m/s fpm
    Maximum pU factor 1.5 42,000 N/mm² x m/s psi x fpm
    Coefficient of friction, f 0.2 0.2
    Recommendations
    Shaft surface roughness, Ra
    - Normal ≤ 0.8 ≤ 31.5 µm µin
    Shaft surface hardness
    - Normal 58-62 58-62 HRC HRC

Need advice?

Our experts are ready to help you find the right solution for your specific application.