Skip to main content

TriboShield® TS225
Nanostructured Coatings for Low to Medium Loads

GGB TriboShield TS225 nanostructured polymer coatings for medium loads
Special gear coated with GGB triboshield TS225 nanostructured polymer coatings
Turbo rotor coated with GGB triboshield TS225 nanostructured polymer coatings
GGB's TriboShield™ TS161 aluminum profile piece

Product's benefits

  • Simply Assembly
    Simple assembly
  • Reduce Size and Weight
    Reduce size/weight
  • Common to One Piece Compact Design
    Common to One Piece Compact Design
  • Lubricated Operation
    Lubricated operation
  • Low Weight
    Low Weight
  • Increased Wear Resistance
    Increased Wear Resistance
  • Extended Service Life
    Extended service life
  • Dry Operation
    Dry operation


TS225 is based on a nanostructured thermoset polymer designed for low friction and high wear resistance at low to medium loads in dry or lubricated conditions. TS225 is part of the standard TriboShield® product range.


  • Piston skirts for internal combustion engines
  • Garden and DYI tools
  • Excellent friction at high sliding speeds
  • Very good friction in lubricated conditions
  • Applicable to heat-sensitive substrates
  • High surface hardness

TriboShield® coatings are applied directly to the customer’s part and are suitable for complex geometries as well as various substrates e.g. steel, stainless steel, Al, Ti, Mg, etc. They can be used for both interacting surfaces that are in relative motion.

GGB TriboShield TS225 - Nanostructured Polymer Coatings
GGB TriboShield® Polymer Coatings - The Future of Eco-Friendly Coatings

Operating performance

TriboShield® TS225
Dry Operation Consult with Applications Engineer
Lubricated Operation Not-applicable
Greased Operation Consult with Applications Engineer
Machinable Consult with Applications Engineer
RoHS Compliant Compliant
Standard Sizes Not-applicable
Application Excellence

Coatings Advantages

  • More compact design
  • Less complex system assembly
  • Reduced weight
  • Increased surface durability

Technical specifications

  • General

    Value Unit
    Color Black
    Maximum continuous service temperature 120°C 248°F °C °F
    Maximum short-term peak temperature 130°C 266°F °C °F
    Friction coefficient, typical range* 0.04 - 0.25
    Food contact compliant** No

* Dependent on contact pressure, sliding speed and contact geometry.

** Your specific food contact condition may require additional approval.

For more information please either check our Coatings FAQ section or contact your local GGB representative. 

Need advice?

Our experts are ready to help you find the right solution for your specific application.