Skip to main content
Image

DP10
Metal-Polymer Anti-Friction Plain
Bearings

GGB DP10 Metal polymer composite plain bearing for lubricated applications
GGB DP10 Metal polymer composite flanged bearings
GGB DP10 Special bearing for lubricated applications
GGB DP10 metal polymer thrust washer for your lubricated applications

Product's benefits

  • Simply Assembly
    Simple assembly
  • Reduced System Cost
    Reduced System Cost
  • Reduce Size and Weight
    Reduce size/weight
  • Quiet Operation
    Quiet Operation
  • Maintenance Free Operation
    Maintenance Free Operation
  • Dry Operation
    Dry operation
  • Dimensional Stability
    Dimensional Stability

Characteristics

  • Good wear and low friction performance over a wide range of loads, speeds and temperatures in dry running conditions
  • Very good performance in lubricated applications particularly in marginally lubricated applications
  • Suitable for linear, oscillating and rotating movements
  • Lead-free material compliant to ELV, WEEE, and RoHS specifications
 
AVAILABILITY

Bearing forms made to order: standard forms in special dimensions, half-bearings, special shapes obtained by stamping or deep drawing, bearings with locating notches, lubricant holes and machined/stamped grooves, customized bearing designs

Datasheet
GGB DP10 - Lead-free Metal-Polymer Plain Bearing Material
Brochure
GGB DP4, DP10 & DP11 - Metal-Polymer - Self-Lubricating Lead-free Bearings

Operating performance

Choose the product I want to compare
DP10
Dry Operation Good
Lubricated Operation Good
Greased Operation Fair
Machinable Consult with Applications Engineer
RoHS Compliant Compliant
Standard Sizes Not Available
Application Excellence
DP4®
Good
Very Good
Good
Consult with Applications Engineer
Compliant
Available
DP4-B
Good
Very Good
Good
Consult with Applications Engineer
Compliant
Not Available
DP31
Fair
Very Good
Fair
Consult with Applications Engineer
Compliant
Not Available
DX®
Poor
Good
Very Good
Applicable
Compliant
Available

Composition

  • Metal-Polymer Composite Material
  • Steel Back + Porous  Bronze Sinter +
  • PTFE + Solid Lubricant

Technical specifications

  • General

    BEARING PROPERTIES Value Unit
    Maximum load, p
    - Static 250 36,000 N/mm2 psi
    - Dynamic 140 20,000 N/mm2 psi
    Operating Temperature
    - Min -200 -328 °C °F
    - Max 280 536 °C °F
    Coefficient of linear thermal expansion
    - Parallel to the surface 11 6 10-⁶/K 10-⁶/F
    - Normal to the surface 30 17 10-⁶/K 10-⁶/F
    Dry
    Maximum sliding speed, U 2.5 500 m/s fpm
    Maximum pU factor 1.0 29,000 N/mm² x m/s psi x fpm
    Coefficient of friction, f 0.03 - 0.25 * 0.03 - 0.25 *
    Oil Lubricated
    Maximum sliding speed, U 5.0 1,000 m/s fpm
    Maximum pU factor 10.0 286,000 N/mm² x m/s psi x fpm
    Coefficient of friction, f 0.02 - 0.08 0.02 - 0.08
    Recommendations
    Shaft surface roughness, Ra
    - Dry 0.3-0.5 12-20 µm µin
    - Lubricated ≤ 0.05 - 0.4 * ≤ 2 - 16 * µm µin
    Shaft surface hardness
    - Unhardened acceptable, improved bearing life > 200 > 200 HB HB
    For Superior Performance Value
    Grease Lubricated DP4® / DX
    Water Lubricated DP4-B
    Process Fluid Lubricated DP4 / DP31

* Depending on operating conditions

Need advice?

Our experts are ready to help you find the right solution for your specific application.