Rear Shocks Bush Bearings:
  • DP4
Clutch Release Bush Bearing:
  • DP4
Brake CAM Bush Bearing:
  • EP Series
  • DP10
Swing Arm Bush Bearing:
  • EP Series
  • Filament Wound
Transmission Bearings/Washers:
  • DP4
  • DP31
Brake Pedal Bearings:
  • EP Series
  • DP4
Main Stand/Side Stand Bush Bearings:
  • EP Series
  • DP4
Clutch/Brake Pivot Bearings:
  • EP Series
  • DP4
Throttle Body/Air Suction Valve Bearing:
  • DP4
Gear Shift Fork Pad/Bearings:
  • EP Series
  • DP4
Front Fork Shocks Bush Bearings:
  • DP4
Rocker Arm Pivot Bearings:
  • DP31
  • DTS10
Engine Crank Shaft Support Bearing:
  • DP10
  • DTS10
DP4™

DP4

Structure

Metal-Polymer Composite Material

Characteristics

  • Good wear and low friction performance over a wide range of loads, speeds and temperatures in dry running conditions
  • Very good performance in lubricated applications and good performance in greased applications
  • Suitable for linear, oscillating and rotating movements
Learn more about DP4
DP31™

DP31

Structure

Metal-Polymer Composite Material

Characteristics

  • Excellent low friction and wear resistance in lubricated applications
  • Excellent flow erosion and cavitation resistance
  • Very good fatigue strength
Learn more about DP31
DP10™

DP10

Structure

Metal-Polymer Composite Material

Characteristics

  • Very good wear and low friction performance over a wide range of loads, speeds and temperatures in dry running conditions
  • Very good performance in lubricated applications particularly in marginally lubricated applications
  • Suitable for linear, oscillating and rotating movements
Learn more about DP10
DTS10™

DTS10

Structure

Metal-Polymer Composite Material

Characteristics

  • The first polymer-lined bearing for lubricated conditions offering low friction and high wear resistance that is designed to be machined on-site for tight tolerances
  • Excellent wear resistance and low friction in lubricated hydraulic applications
  • Excellent chemical resistance, fatigue strength, cavitation and flow erosion resistance, and good behavior in dry start-up conditions
Learn more about DTS10
EP™ Series

EP Series

Structure

Thermoplastic Bearing Compound

Characteristics

  • High compressive strength and creep resistance
  • good thermal conductivity and low thermal expansion
  • Excellent wear resistance and low friction in both dry and lubricated operating conditions
Learn more about the EP Series
Filament Wound

Filament Wound

Structure

Reinforced Composite Material

Characteristics

  • Excellent corrosion resistance
  • Idea for high static and dynamic loads
  • Excellent high load capacity and shock and edge loading capacity
Learn more about our Filament Wound range of products