September 24, 2018
GGB’s New EP®30 Bearing Material Featured in Konstruktionspr
Konstruktionspraxis, a German construction and design engineer publication, recently featured an...
From November 6, 2018 to November 11, 2018
From November 27, 2018 to November 30, 2018
Visit us at Booth # N2.591
Get in touch with our experts
Oil & Gas
Increase Service Life
Replace Roller Bearings
Reduce Size / Weight
Engineered Plastics Bearings
Fiber Reinforced Composite Bearings
Bushing Blocks and Thrust Plates
Metal and Bimetal Bearings
AT A GLANCE
Equipment in the food processing industry must comply with stringent hygienic standards.
So the bearings must be able to resist corrosion, chemical attack and frequent wash downs with water and cleaning solvents.
DP4-B lead-free, metal-polymer bearings are used to guide the slicing equipment at strokes of 210 mm and 420 mm, a frequency of 30 slices per minute and continuous operation for 16 to 24 hours a day.
The structure of the composite bearings consists of a corrosion-resistant bronze backing onto which is bonded a porous bronze sinter layer, impregnated and overlaid with a filled PTFE sliding layer. This provides good wear resistance and low friction performance under a wide range of load, speed and temperature conditions.
The benefits from using DP4-B composite bearings include:
Electric Side Step
Explore our customer reviews