July 7, 2020
GGB Earns 2019 Supplier Quality Excellence Award from Genera
GGB’s manufacturing site in Thorofare, New Jersey, recently received the General Motors Supplier...
PyroSlideTM 1100 Webinar:
Discover How to Beat the Heat with GGB’s New High Temperature Powder Metal Bearing Solution
Hydro White Paper:
GGB Composite Bearing Design with Improved Tribology and Machinability for Aggressive Applications
Get in touch with our experts
Oil & Gas
Increase Service Life
Replace Roller Bearings
Reduce Size / Weight
Engineered Plastics Bearings
Fiber Reinforced Composite Bearings
Metal and Bimetal Bearings
Bushing Blocks and Thrust Plates
GGB DP4 high-performance, metal-polymer flat thrust washers successfully replaced needle roller bearings in a rear braking system. The system combines mechanical and hydraulic functions to apply a braking force when a vehicle is parked.
Torque generated by depressing a floor-mounted pedal or pulling a lever is converted to a clamping action by a shaft immersed in brake fluid that rotates three balls into a wedge-like mechanism.
The bearings must withstand forces of up to 15 000 N / 3 300 lbs and reduce friction created by the relative movement of the shaft, rotating up to 30 degrees every second or less.
The lead-free GGB DP4 thrust washers were benchmarked, compared with alternative options and ultimately used to replace the needle roller bearings.
The structure of GGB DP4 composite bearings consists of a rigid steel backing, to which is bonded a porous bronze sinter interlayer impregnated and overlaid with a filled PTFE bearing layer. This highly resistant composite bearing structure can withstand specific loads of up to 250 MPa / 36 000 psi.
In this application, the excellent self-lubricating properties of GGB DP4 metal-polymer thrust washer bearings enable the following benefits to be obtained:
Gearbox Shifting Towers and Shifter Forks
Isolator Pulley Dampers
Shock Absorbers and Struts
Explore our customer reviews