July 12, 2018
GGB’s New EP®30 Material featured in Industry Tap
Industry Tap, Engineering and Industry News website featured an article introducing GGB’s newest...
From September 18, 2018 to September 20, 2018
CTI Symposium China
Visit us at booth 17
From November 6, 2018 to November 11, 2018
Get in touch with our experts
Oil & Gas
Increase Service Life
Replace Roller Bearings
Reduce Size / Weight
Engineered Plastics Bearings
Fiber Reinforced Composite Bearings
Bushing Blocks and Thrust Plates
Metal and Bimetal Bearings
AT A GLANCE
Back to FAQ
While all ball bearings reduce rotational friction, some high precision bearings are specially manufactured to withstand support loads, or bearing loads, in various directions. Two examples are axial loads, or thrust loads, and radial loads.
Axial bearings, or thrust bearings, are designed to withstand force in the same direction as the shaft. This is called an axial load, or thrust load. In some applications, ceramic bearings, a type of radial bearing, are used to withstand high rotational speeds. The rolling elements are ceramic, which is significantly lighter than steel. This reduces the centrifugal force within ceramic bearings at high speeds.
Radial ball bearings are designed to withstand forces that are perpendicular to the direction of the shaft, or radial loads. Some ball bearings are able to withstand a radial and axial load applied on the shaft, these combined axial/radial load bearings are achieved by axial angular contact. The angle of these axial radial bearings allows the axial load and the radial load to be distributed more evenly along the axial angular contact ball bearing.
GGB offers a range of plain bearing solutions that are able to support axial loads, radial loads, or even both types of loads.
GGB cylindrical bearings, with their high load capacities, are designed to support large radial loads. Our fiber reinforced composite bearings are especially apt for these applications with load capacities up to 415MPa. For applications with high radial loads and the possibility of light axial loads, GGB metal-polymer flanged bearings are recommended.
Finally, GGB thrust washers and flanged thrust washers are offered for applications with heavy axial loads. These washers are available as a special form of our popular plain bearings including DP4® and DU® self-lubricating bearing materials. In addition, GGB-MEGALIFE™ XT thrust washer with PTFE tape liner is offered as a fiber reinforced composite PTFE thrust washer for heavy axial load applications that also require a solution with good chemical resistance.
Still have any questions? Please do not hesitate to contact us