March 19, 2018
Dr. Michael Kim from GGB to teach online SAE Course covering
GGB’s Principal Engineer for Tribological Materials, Dr. Michael Kim is teaching an online SAE...
From July 16, 2018 to July 22, 2018
Visit us at hall 2, stand # 2030
From September 18, 2018 to September 20, 2018
CTI Symposium China
Visit us at booth 17
Get in touch with our experts
Oil & Gas
Increase Service Life
Replace Roller Bearings
Reduce Size / Weight
Engineered Plastics Bearings
Fiber Reinforced Composite Bearings
Bushing Blocks and Thrust Plates
Metal and Bimetal Bearings
AT A GLANCE
Back to FAQ
Multi-gym pulley wheels are typically fitted with roller bearings, which can be replaced with our plain bearings. These plain bearings offer a number of significant advantages compared with rolling-element bearings.
Beside their simplicity of design and cost-effectiveness, plain bearings provide greater load capacity and significant space and weight savings for lighter, more compact designs. In addition they compensate for misalignment, reducing edge loading and dampening noise and vibration. Because they contain no moving parts, plain bearings also provide quieter, more reliable performance and require little to no maintenance.
Plain bearings are not suitable for all applications, especially those requiring ultra-low friction and/or high-precision shaft location. However they typically outperform roller bearings in applications involving high loads and slow oscillating movements which can damage rolling element bearings and cause them to fail prematurely.
Replacing traditional rolling-element bearings with our plain bearings can provide both a technological and competitive advantage. Greater contact area and conformability provide high load capacity and resist damage from fatigue, shock and edge loads. The frictional characteristics of plain bearings also resist the inertia and high-speed skidding to which roller bearings are subject, and they tolerate misalignment better than many rolling-element designs.
Their slim, one-piece construction and smaller housings save space and weight, and simple press fitting into machined housings virtually eliminates the potential for installation damage. Converting to plain bearings also can yield substantial savings from lower parts costs, relaxed shaft tolerances and surface finish requirements, less bulky housings, and simpler, lower-risk assembly.
Learn more about GGB bearing solutions for the recreational equipment applications.
Still have any questions? Please do not hesitate to contact us